Sync Audio Output With Video Play - Philips HTS3172/93 User Manual

Tip
•
You can change the PBC setting (see 'Adjust
settings' > 'Preferences' > [PBC] ).

Sync audio output with video play

If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.
1
Press and hold AUDIO SYNC until
'AUDIO SYNC XXX' is displayed. 'XXX'
denotes the delay time.
2
Within fi ve seconds, press VOL +/- to set
the delay time for audio output.
Note
•
If the volume control is not used within 5
seconds, it resumes normal volume control
function.
Quick skip play to a specifi c time
1
During play, press
The disc status menu is displayed.
»
2
Press to view information, then press
OK .
• [TT Time] (title time)
[Ch Time] (chapter time)
•
• [Disc Time] (disc time)
[Track Time] (track time)
•
20 EN
INFO .
3
Press the Numeric buttons to enter the
time where you want to skip to, then
press OK .
Note
•
The options are different depending on the
disc type.
Repeat play a specifi c section
1
During playback, press
The disc status menu is displayed.
»
2
Select [Repeat] in the menu, then press
.
3
Move to [Repeat AB] in the menu, then
press OK to set the starting point.
4
Press OK again to set the ending point.
Repeat play starts.
»
5
To cancel repeat play, select [Off] and
press OK .
Note
•
The marked section for repeat play is only
possible within a track/title.
View video play from different camera
angles
1
During play, press
The disc status menu is displayed.
»
2
Select [Angle] , then press .
3
Press the Numeric buttons to select an
angle, then press OK .
Play changes to the selected angle.
»
Note
•
Applicable only to discs contain multi-angle
scenes.
INFO .
INFO .