Erase Schedule; Set Mv/Pump Delay; Set Zone Delay; Set Mv/Pump In Delay - Toro EVOLUTION Series User Manual

Use the erase schedule function to reset the selected schedule. The schedule's status will be set to DISABLED (except for schedule A, it
remains ENABLED) and the schedule TYPE set to WEEKDAYS. All other settings within the schedule will be set to OFF.
Step 1
– While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
want to edit. Press SELECT
Step 2
– Use the Up
Step 3
– Use the Up

ERASE SCHEDULE

ARE YOU SURE?
Use the MV/Pump Delay function to set a wait time between activating the master valve or pump, and activating the first zone in the
schedule. This delay is usually used to allow the system enough time to build pressure for proper operation, or to fill the irrigation piping
system with water.
Step 1
– While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
want to edit. Press SELECT
Step 2
– Use the Up
Step 3
– Use the Up
SCHEDULE A
ERASE SCHEDULE
MV/PUMP DELAY
ZONE DELAY
Use the Zone Delay function to set a wait time after a zone ends watering and before another zone is activated. This delay is usually used
when the system is being fed by a well. The delay is used to allow the well enough time to recharge.
Step 1
– While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
want to edit. Press SELECT
Step 2
– Use the Up
Step 3
– Use the Up
SCHEDULE A
MV/PUMP DELAY
ZONE DELAY
MV/PUMP IN DELAY OFF
Use the MV/Pump In Delay to set whether the master valve or pump is active during zone delays. The default is set to OFF.
Step 1
– While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
want to edit. Press SELECT
Step 2
– Use the Up
Step 3
– Use the Up
SCHEDULE A
MV/PUMP DELAY
ZONE DELAY
MV/PUMP IN DELAY
.
or Down arrows to navigate to ERASE SCHEDULE. Press SELECT
or Down arrows to
NO
.
or Down arrows to navigate to MV/PUMP DELAY. Press SELECT
or Down arrows to adjust the delay time as necessary. Press SELECT
00:10
OFF
.
or Down arrows to navigate to ZONE DELAY. Press SELECT
or Down arrows to adjust the delay time as necessary. Press SELECT
OFF
00:10
.
or Down arrows to navigate to MP/PUMP IN DELAY. Press SELECT
or Down arrows to set the MP/Pump In Delay to ON or OFF during zone delays. Press SELECT
OFF
OFF
ON
to proceed to erase the schedule or No to cancel. Press SELECT
or Down arrows to select the Schedule you
.
or Down arrows to select the Schedule you
.
.
or Down arrows to select the Schedule you
.
.
or Down arrows to select the Schedule you
.
.
.
19