Installing The Boxed Intel  Xeon Processor; Intel Sc5200 Server Chassis, Hot-Swap Redundant Power Version; Choosing The Processor Socket; Opening The Socket Lever - Intel SE7501BR2 Installation And Integration Manual

Insta lling the Boxed Intel
S C5200 Server Chassis, Hot-Swap Redundant Power
Version

Choosing the Processor Socket

Use these instructions for installing your processor when using the Hot-Swap Redundant
Power version of the Intel
•
If only ONE processor is to be used, it must be installed in the processor socket
labeled CPU1, located closest to the corner of t
terminator is required on a single processor system. Do not install a terminator in the
SE7501BR2 Server Board.
• If installing a SECOND processor, verify that the processors are identical in volt
and speed. Do not mix processors of different types or frequencies.
•
To avoid touching the pins, hold the processor only by the edges when unpacking it.
Ope ning the Socket Lever
Open the lever all the way as shown. This server board has "zero-
insertion force" (ZIF) sockets. If the pr
into the socket holes, make sure the lever is in the full-open
position and the processor is oriented properly. Applying pressure
will damage the processor pins.
Attaching the Processo
1. Align the alignment triangle mark on the
processor with the alignment triang
cutout on the socket.
2. Insert the processor in the socket.
3. Close the socket lever all the way as
shown.
14
Intel Server Board SE7501BR2 Installation and Integration Guide

Xeon Processor – Int

SC5200 Server Cha
ocessor does not drop easily
r
le
ssis.
he server board. No processor
el
age