Advertisement
1/2 X 3"
3/8 X 2-3/4"
FIGURE 1
STEP 1
¯ Securely assemble REAR UPRIGHT (16) to BASE (10) using two 1/2 X Y' BOLTS (42), two 1/2" WASHERS (52),
1/2" LOCKNUTS (49).
¯ Slide LEG EXT. CABLE ASSEMBLY
(90) through openings in BASE (10) as shown in FIGURE
¯ Securely assembe two 3-1/2" PULLEYS (79) into BASE (10) using two 3/8 X 2-3/4" BOLTS (38), four 3/8" FLANGE SPACERS
and two 3/8" LOCKNUTS (48). (NOTE: Make sure LEGEX T. CABLE ASSEMBLY
(90) is muted trader PULLEYS and BOLTS.)
¯ Slide LEG EXT. CABLE ASSEMBLY
(90) through the opening in the end of the BASE (10) as shown in FIGURE
¯ Insert four 3/4" FLANGE BEARINGS (69) into tubes on REAR UPRIGHT (16) as shown in FIGURE
Advertisement
