Advertisement
STEP 11
Securely assemble the PEC SEAT PAD (27) to the FRONT UPRIGHT
(1 i) as shown, using two 3/8 X 4" BOLTS (41), and two 3/8" WASHZ
ERS (5 I) as shown in FIGURE 11.
¯ Ass emble two ROLLER PAD S (31 ) to the FRONT UPRIGHT (11 ) using
one 16" TUBE (30), and two STARLOCK
COLLARS (73) as shown
FIGURE 11.
3/8 X 4"
FIGURE 11
¯ All
WASHERS & LOCKNUTS
are 3/8" WASHERS (51) & 3/8"
LOCKNUTS (48).
3/8 X 4"
FIGURE
12
3/8 X 3"
;TEP 12
¯ Loosely attach FRONT UPRIGHT (11) to the BASE (10) using two 3/8 X 3" BOLTS (39), four 3/8" WASHERS
(51),
3/8" LOCKNUTS
(48) as shown in FIGURE 12. (NOTE: Make sure cable is routed under the bolts.)
¯ Loosely attach FRAME SUPPORT (1) to the BASE (10) using one 3/8 X 3" BOLT (39), two 3/8" WASHERS
(51), and
LOCKNUT
(48) as shown in FIGURE 12. (NOTE: Make sure cable is routed under the bolts.)
¯ Loosely attach FRAME SUPPORT (1) to the FRONT UPRIGHT (11) using two 3/8 X 4" BOLTS (41), four 3/8" WASHERS
and two 3/8" LOCKNUTS
(48) as shown in FIGURE 12.
10
Advertisement
