Advertisement
FIGURE 28
;TEP 28
¯ Loop LAT CABLE (92) around pulley in FLOATING PULLEY BRACKET (22) as shown in FIGURE
¯
ScrewthethreadedendofLATCABLE(92)
intotheendoftheWEIGHTSTACKSHAFT(80)unfiltheFLOATI)IGPULLEYBRACKET
(22) firmly contacts the end cap on the TOP BOOM (7) and the CABLE (92) slightly pulls on the HEAD PLATE (81). Tighten
nut securely. See FIGURE 28.
BRACKET (22) using one 3/8 X 1-3/ BOLT (36) and one 3/8" LOCK-
NUT (48) as shown in FIGURE 29.
3/8 X 1-3/4"
¯ AttaChiNG
PULLEytnV°
1" X l"BRACKETGLIDES(22)(87
)astOshown.the
bottom of the .second FLOAT-
FIGURE 29
4
5
6
I
I
21
Advertisement
