Servicing
4.2.2 Replacing the bender
- Fig. 25, Fig. 26, Fig. 27 -
For replacing the bender
slightly press in gripping yoke
turn through 90° to the left
(anticlockwise) and tilt upwards.
- Remove former
to the front.
- Undo Allen screw
and remove carrier
.
- Pull out bender
downward (arrow A)
Installation is performed in the inverse order.
Press the latch
slightly into the bender while the bender
is being pushed into the stitching
head.
Hohner Maschinenbau GmbH
HK 52/8 S
47