Adjusting The Clincher Box - Hohner UNIVERSAL 52/8 S Operating Instructions, Spare Parts List, Special Staples, Options

Operation

3.1.4 Adjusting the clincher box

- Fig. 8 -
The center of the bender inside the stitching head must be precisely aligned to the center of the
clincher box.
- Loosen locking nuts (or clamping screws) (and locking screws).
- Move clincher box until it is precisely aligned with the center of the bender.
- Fix clincher box by tightening the locking nuts (or clamping screws) (and locking screws).
Hohner Maschinenbau GmbH HK 52/8 S 23