Section 2. General Information; Section 3. Heater Assembly Labeled - Trane BAYEVCC25BK1A Installer's Manual

INSTALLER'S GUIDE

Section 2. General Information

This electric heater accessory is designed to provide
power directly to the air handler from the accessory
heater's power supply, eliminating the need for addi-
tional circuits. The power and control wiring each use
a single wire harness to connect the heater and the air
handler.
1. Check the heater nameplate to confirm that the selected
heater is approved for use with the air handler.
2. Check the components received for damage. Report any
defects or shortages to the transportation company im-
mediately.
3. Be sure the power supply matches the listing shown on
the heater nameplate.

Section 3. Heater Assembly Labeled

Breaker Bracket Cover
Circuit Breakers
Retainer Tab and screw
- in document pack
Electric Heat
Control Platform
Electric Heat Control - 24V
The two switches in the middle are
cyclic switches, The two switches
on the top and the one on the
bottom right are non-resettable
limit switches.
Page 2
Heater Rack
Heater Element
Terminations
Base Plate
Edge Guard
- in document pack
Breaker Bracket
Width Adjustment Brackets
Heater Baffle
Retainer Tab and screw
- in document pack
Nameplate
Non-cyclic
Thermal Limit Switch
Cyclic Thermal
Limit Switch
Non-cyclic
Thermal Limit Switch