Supermicro SUPERSERVER E102-9AP-L User Manual page 48

Table of Contents

SuperServer E102-9AP-L User's Manual

multimedia streams, providing smooth playback, and reducing the dependency on other

timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the CPU.

The High Precision Event Timer is used to replace the 8254 Programmable Interval Timer.

The options are Disable and Enable.

Super IO Configuration



Super IO Chip NCT6106D



Serial Port 1 Configuration

Serial Port

Select Enabled to enable the onboard serial port specified by the user. The options are

Disabled and Enabled.

Device Settings

This item displays the base I/O port address and the Interrupt Request address of a serial

port specified by the user.

Change Settings

This feature specifies the base I/O port address and the Interrupt Request address of Serial

Port 1. Select Auto to allow the BIOS to automatically assign the base I/O and IRQ address

to a serial port specified. The options are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4,

5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3, 4, 5,

6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).

COM Port Mode

Use this item to select the COM port mode. The options are RS232 Mode, RS422 Mode,

and RS485 Mode.



Serial Port 2 Configuration