Table of Contents
Advertisement
SuperServer E102-9AP-L User's Manual
Quick Reference
Jumper
Description
JLCDPWR1
LVDS Panel VCC Power 3.3V / 5V / 12V
JPF1
Power Force On
JPME2
Manufacturing Mode
LED
Description
LED1
Power LED (for debugging only)
Connector
Description
BT1
Battery Connector
FAN1*
System Fan Header
I-SATA1*
Intel PCH SATA 3.0 Port
JCOM1: COM1/COM2
Serial COM Ports
JCOM2: COM3/COM4
(JCOM1 supports RS232/RS422/RS485, JCOM2 supports RS232)
JD1
Speaker Header
JF1
Front Control Panel Header
JGP1
DIO Connector
JHDMI
Back Panel HDMI Port
JIP1*
Inverter Power Header
JMD1
M.2 Slot (B-KEY) (supports PCI-E Gen2 X1/SATA / USB 2.0)
JMP1
Mini PCI-E Slot (supports PCI-E Gen2 X1/USB 2.0)
JPH1*
SATA Power Connector (for one HDD system)
JPW1
4-pin 12V-Standby R/A Type Power Connector
JSMBUS1
System Management Bus Header
JTPM1
Trusted Platform Module/Port 80 Connector (for debugging only)
LAN1 – LAN2
LAN (RJ45) Ports
LVDS1*
Dual Channel 48-bit LVDS Connector*
USB4/5
Back Panel Universal Serial Bus (USB) 3.0 Ports
USB0/1, USB2/3
USB 2.0 Headers
VGA
Back Panel VGA Port
Note: Connectors marked with an asterisk (*) are unused or inaccessible by the system.
Default Setting
Pins 1-2 (3.3V), Pins 3-5 (5V), Pins 3-4 (12V)
Pins 1-2 (Power Force On)
Pins 1-2 (Normal)
Status
Solid Green: S0 mode
Solid Red: S3/S4/S5 modes
12
Advertisement
Table of Contents
