Table of Contents
Advertisement
SuperServer E102-9AP-L User's Manual
1.5 Server Installation and Setup
The server is shipped with the onboard processor and the motherboard installed in the
chassis. Several steps are necessary to begin using your server. You must add memory,
mount the hard disk drive, and mount the system in place.
Unpacking the System
Inspect the box in which the system was shipped and note if it was damaged. If the server
itself shows damage, file a damage claim with the carrier.
Warnings and Precautions
Review the electrical and general safety precautions in Appendix B.
Adding Components to your System
•
Memory: If your system is not already fully integrated with system memory, refer to Chapter
2 for details on compatible types of memory and the installation procedure.
•
Drives and Storage: To add storage capabilities to your server, see Chapter 2.
14
Advertisement
Table of Contents
