Table of Contents
Advertisement
Installing Mounting Brackets (Optional)
The chassis includes mounting brackets that fit the VESA standard or can be wall-mounted.
For wall mounting, the brackets extend out from the chassis as shown below.
1. Install the brackets using the four provided screws as shown below.
Figure 1-5. Installing VESA Mount Brackets
2. Secure the brackets to the surface where you want the server to be mounted.
•
For VESA mount, slide onto existing posts.
•
For wall mount, affix screws through the bracket holes.
Figure 1-6. Installed Wall Mount Brackets
(Viewed from under the chassis)
15
Chapter 1: Introduction
Advertisement
Table of Contents
