Supermicro SUPERSERVER E102-9AP-L User Manual page 30

SuperServer E102-9AP-L User's Manual
Power Force On
Use this jumper to select the "POWER FORCE ON" function when the AC power cord is
plugged in. When enabling force power on and AC power recovery, the system will boot up
automatically without pressing the power button.
Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings.
Power Force On
Jumper Settings
Jumper Setting Definition
Power Force On (Default)
Pins 1-2
(when AC power cord is plugged)
PWR BTN Power On
Pins 2-3
(when AC power cord is plugged)
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
30