Table of Contents
Advertisement
SuperServer E102-9AP-L User's Manual
2.3 Motherboard Components
Processor
The E102-9AP-L features an embedded Intel Atom E3930 Quad Core SoC processor.
Memory Support
An integrated memory controller supports up to 8 GB of DDR3L Dual Non-ECC SO-DIMM
of speeds up to 1866 MHz in one low-profile slot.
Check the Supermicro website for a list of memory modules that have been validated.
Installing Memory
A SO-DIMM can be installed in the memory slot on the bottom (under side) of the motherboard.
The motherboard must be removed from the chassis. Exercise extreme care when installing
or removing DIMM modules to prevent damage.
Installing a SO-DIMM Module into a Horizontal Socket
1. Align the receptive point on the bottom of the SO-DIMM module against the key on the
memory socket. Note the notches on the side of the SO-DIMM module and those on the
socket to avoid causing damage.
2. Line up the bottom of the SO-DIMM memory module with the edge of the horizontal
socket.
3. Once they are lined up, push the memory module into the memory socket until the
module is securely seated in the socket.
Receptive Point
on the Module
Socket Key
SO-DIMM Memory
Module
Memory Module Socket
18
Advertisement
Table of Contents
