Rowenta ULTRA STEAM Instructions For Use Manual page 10

1800129617 DR6000 U1_110 x 154 23/08/13 10:46 Page4
• Remove the lint pad from the steam brush
by pulling it to the bottom - fig.10a.
• For storage, attach the lint pad to the steam
brush. Gently push the top of the lint pad
into place until it snaps in - fig.10b.
fter use
Wait for 15 minutes until the steam
head is completely cool.
• Unplug the appliance. Empty the water re-
maining in the tank and leave unit on its
side to cool. fter the appliance has coo-
led down, it may be stored thanks to the
hanger hook.
Warning: never forget to unplug the
steam brush and empty the tank after
your working session. While not in
use, you can hang your steambrush
by its hook.
Cleaning/Descaling
• Clean the main unit with a damp cloth.
• Your steam brush must be descaled oc-
casionally if you notice the steam power
is weak.
The time between descaling operations
depends on the quality of the water and
the frequency with which you use the
appliance.
nvironment protection first !
Your appliance contains valuable materials which can be recovered
or recycled.
‹
Leave it at a civic waste disposal centre.
• To carry out an effective descaling opera-
tion, we advise you to :
1. Fill the water tank with white vinegar.
2. Plug the appliance and wait until it
reaches the working temperature.
3. bove a sink, press the steam trigger.
Wait for a few seconds. Press again the
steam trigger.
4. Repeat the previous steps until the
water tank is empty. The scale will be re-
moved. Stay away from the steam out-
put: there is a risk of particles spitting.
5. Important: It is necessary to clean the
appliance to avoid spattering your
clothes with vinegar residue. It is impor-
tant to clean the water tank with water,
then, to fill it again with fresh water.
6. Repeat steps 3 and 4 until the water tank
is completely empty.
7. Unplug the steam brush. Wait 15 mi-
nutes until it is completely cool. Use a
rag to wipe the scale marks that may ap-
pear on the steam head during desca-
ling operation.
C UTION: Risk of electric shock.
Never immerse the steam head in
water! The steam brush contains
electric components that could be
damaged by direct water.
4