Use caution when you turn a steam iron upside down – there may be hot water in the reservoir. 9. The use of accessory attachments is not recommended by Rowenta Appliance Company and may result in fire, electric shock or personal injury.
Supply cord K Temperature light L Transparent water tank M Cord wrap N Soleplate according to model – Stainless steel – Titan Plus O Maximum water level indicator Features vary by model. Check packaging or markings on iron for exact features.
Slowly peel the protective cover off the soleplate or remove the transparent soleplate protector. It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear. 3-WAY AUTO-OFF (depending on model) 30 sec.
SELECTING THE TEMPERATURE To avoid an automatic switch off while the iron is heating up, always keep the iron on its heel. Start at low temperature and graduate to high temperature. For delicate fabrics we recommend carrying out a test on an unobstrusive part of the garment (inner seam).
Tap water Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness; or use undiluted inexpensive bottled spring water.
Steam Chamber Cleaning Function This function allows loose mineral deposits and other impurities that build up inside the iron to be flushed out. This type of self cleaning only needs to be carried out occasionally and never more than once a month.
For more information refer to the full use instructions. If after using the troubleshooting guide you are still experiencing problems, do not return the iron to the store, but contact Rowenta Consumer Service who will be pleased to assist you.
In the interest of improving products, Rowenta reserves the right to change specifications without prior notice. LIMITED WARRANTY All Rowenta products are warranted for 1 year from date of purchase against defects in material and workmanship. During this period, any Rowenta product that, upon inspection by Rowenta, is proved defective, will be repaired or replaced, at Rowenta's option, without charge to the customer.