Threading The Left Needle - Husqvarna Viking Amber Air S 400 User Manual

Threading the Left Needle

Turn off the main power switch and unplug the machine.
Note: Raise the presser foot lifter for easier threading. Raise the needles
by turning the handwheel slowly toward you until the mark on the wheel
matches the mark on the cover.
Place a thread spool on the left spool pin. Pull the thread
through the left thread guide from back to front (A).
Note: If the thread tends to slip away from the guide
while sewing, pass the thread through both thread guide
holes as shown (B).
Slide the thread under the top cover thread guide (C) as
illustrated.
Pull the thread along the threading slit. Using both
hands, insert the thread between the tension disks (D).
22 – GETTING READY TO SEW
A
B
C
D
F
E
G
H
I
A
C
B
D