Threading the Right Needle
Turn off the main power switch and unplug the machine.
Note: Raise the presser foot lifter for easier threading. Raise the needles
by turning the handwheel slowly toward you until the mark on the wheel
matches the mark on the cover.
A
B
Place a thread spool on the second left spool pin. Pull
the thread through the second left thread guide from
back to front (A).
Note: If the thread tends to slip away from the guide while sewing,
pass the thread through both thread guide holes as shown (B).
Slide the thread under the top cover thread guide (C) as
C
illustrated.
D
Pull the thread along the threading slit. Using both
hands, insert the thread between the tension disks (D).
F
E
G
H
I
A
B
C
D
20 – GETTING READY TO SEW