Use Your Tv In Digital Mode; Get Started; Switch On The Tv For The First Time - Philips 42PFL8803D/30 User Manual

5 Use your TV in digital
mode
5.1

Get Started

• When the TV is powered-on for the first
time you will be prompted to run auto
installation to receive the channels that are
broadcasted locally.
• This process may take 10 to 20 minutes
depending on the number of channels that
are transmitted by the cable provider or
broadcaster.
• When the TV is not receiving any signal
from the antenna or cable, "No signal"
will appear on the TV screen. This can be
caused by the antenna or cable not being
plugged in correctly.
• When no transmission is received from
the broadcaster, "No channel available
(TV)" or "No channel available
(Radio)" will appear on the TV screen.
• You will not be able to watch pay channels
when using direct antenna/cable connection
to the television. "Signal is currently
scrambled" will appear on the TV screen.
• When the set-top box is connected to the
television using coaxial cable, it is necessary
to auto-program the television for the set-
top box source channel and change the
channels at the set-top box to view the
program.
• When the set-top box is connected to
the television using AV connection, select
the television input source for the set-top
box to view the program and change the
channels at the set-top box to view the
program.
5.2 Switch on the TV for the
fi rst time
When you turn on TV for the first time, the
TV is in digital mode. You will need to set the
language and add new services.
EN-14
5.2.1 Setup your language and services
Æ to enter Language and Î or ï
1. Press
to select your preferred language and press
OK to confirm.
Setup Setup Setu p p p
Test re e ception
Language
Install
Select system menu language.
2. Press ï to select Install and press OK to
start the installation.
The TV searches for all available analogue
and digital channels.
When scanning has completed, a pop-up
window will display information on the
number of analogue and digital services
found.
Aut Auto Store A t o St S
Channel Channel
TV
Setup | Setu Setup | Installation | Add new services p | p | p | p | Installa Inst allation tion
Auto Scan
05.1 - TV GloboHD
05.3 - TV GLOBO M
Test Recepti p p p on
Information
Access restrictions
Analog TV services:
Inst
Digital TV services:
Digital Radio services:
Yes
An autoprogram is in progress, please press OK to stop. autoprogram is
3. If no digital channels are detected, press
A/D to switch to analogue mode.
Language
English
t ore
32 32
579 MHz
| A | | A | | dd dd n new s ew servi ervices ces
Total 1 Channels Found
Installation
Current Scanning
Scan percentage
16
1
0
Close
56/56