Related Manuals for Philips 52PFL8605D/93
Summary of Contents for Philips 52PFL8605D/93
- Page 1 Register your product and get support at www.philips.com/welcome 52PFL8605D/93 46PFL8605D/93 42PFL8605D/93 46PFL66x5D/93 40PFL66x5D/93 EN User manual...
-
Page 3: Table Of Contents
Connect to a computer network (For Switch channels PFL8605) Adjust TV volume Use a Conditional Access Module Watch connected devices Use Philips EasyLink Use teletext Use HDMI ARC Use Ambilight Use a Kensington lock 5 Use more of your TV... -
Page 4: Notice
The material in this manual is believed product. Repairs may only be done by Philips adequate for the intended use of the system. Service Centres and official repair shops. Failure... -
Page 5: Important
TV. Secure the wall mount to a wall that can support the combined weight of Safety the TV and wall mount. Koninklijke Philips Risk of electric shock or fire! Electronics N.V. bears no responsibility •... -
Page 6: Screen Care
Disposal of your old product and • When you disconnect the power cord, always pull the plug, never the cable. batteries • Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or Your product is designed and manufactured antenna cable. -
Page 7: Your Tv
3 Your TV Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. This section gives you an overview of commonly used TV controls and functions. - Page 8 (Browse) Accesses the browse menu to select: • program guide • channel list • teletext. (Navigation buttons) Navigates menus. (Previous/Next) • Skips to the previous or next channel. • Skips to the previous or next page of the menu. • Skips to the previous or next track, album or folder.
-
Page 9: Use Your Tv
4 Use your TV Note • If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- on the side of the TV. This section helps you perform basic TV operations (see ‘Use more of your TV’ on page 10). -
Page 10: Adjust Tv Volume
Adjust TV volume Press (Home). » The home menu appears. Watch TV Browse USB Browse PC Scenea Add your devices Setup Press the Navigation buttons to select To increase or decrease volume [Add your devices] and press OK. +/- on the remote control. •... -
Page 11: Use Teletext
Use teletext Set Ambilight active mode You can set the speed at which Ambilight Press (Browse). responds to on-screen images. The browse menu appears. » Press (Experience). The experience bar appears. » Press the Navigation buttons to select [Teletext], then press OK. Press the Navigation buttons to select The teletext screen appears. -
Page 12: Use More Of Your Tv
5 Use more of The following language settings can be your TV configured. [Primary audio]/ [Secondary audio] • Select primary and secondary audio languages for digital channels. Change menu language • [Primary subtitles]/ [Secondary subtitles] Select primary and secondary subtitle languages for digital channels. -
Page 13: Change Picture And Sound Settings
Press OK. Follow the on-screen instructions to » remove the device. Once complete, Watch TV Browse USB Browse PC Scenea the device is removed from the home menu. Add your devices Setup Access the browse menu When watching TV, press (Browse). - Page 14 Manually adjust picture settings Select [Start] and press OK. Follow the on-screen instructions. » When watching TV, press (Home). The home menu appears. » Use pre-defined picture settings Press the Navigation buttons to select [Setup], then press OK. Use the[Smart picture] experience bar to Select [TV settings], then press OK.
-
Page 15: Change Picture Format
Change picture format [100 Hz Clear LCD]: Sets the • TV refresh rate to a maximum of Press (Experience). 100Hz to provide superior motion The experience bar appears. » sharpness, better black level, high contrast with a flicker free, quiet Press the Navigation buttons to select image and a larger viewing angle. - Page 16 [Auto fill] Adjusts the Press the Navigation buttons to adjust picture to fill the the position of the picture. screen (subtitles Press OK to confirm your choice. remain visible). Recommended for minimal • [Setup] Picture shift is also accessible via the screen distortion menu.
-
Page 17: Change Ambilight Settings
The following Ambilight settings can be Press the Navigation buttons to select configured: [Setup], then press OK. • [Ambilight]: Turns Ambilight on or Select [TV settings], then press OK. off. Select [Sound], then press OK. [Dynamic]: Sets an Ambilight setting •... -
Page 18: Use Advanced Teletext Features
• View a list of digital programs being Press OK to confirm your choice. broadcast Press (Back) to exit the menu. • View upcoming programs • Group programs by genre • Set reminders when programs start Use advanced teletext • Setup preferred EPG channels features When watching TV, press... -
Page 19: Use Timers
Use timers Select teletext subpages A teletext page can hold several subpages. You can set timers to switch the TV to standby Subpages are displayed on a bar next to the at a specified time. main page number. When available on a teletext page, press Automatically switch the TV to to select subpages. -
Page 20: Use Child And Rating Locks
Use child and rating locks Lock or unlock one or more channels When watching TV, press (Home). You can prevent your children from watching The home menu appears. » TV by locking the TV and using age ratings. Press the Navigation buttons to select [Setup], then press OK. -
Page 21: Use Subtitles
Use subtitles Use the TV clock Enable automatic TV clock You can enable subtitles for each TV channel. Subtitles are broadcast via teletext or DVB-T If your selected country supports digital digital broadcasts. With digital broadcasts, you broadcast, the clock displays the time data can select a subtitle language. -
Page 22: View Photos, Play Music And Watch Video
Connect to a network and enter the Caution content browser (For PFL8605) • Philips is not responsible if your USB storage Before accessing the content browser, be device is not supported nor is it responsible for damage or loss of data from use of this sure that the TV is connected to a computer feature. -
Page 23: Listen To Music
Change music settings [Show info]: Displays the picture • name, date, size and next picture in When in the music player, press the slide show. (Options). [Stop]: Stops play. • The options menu appears. » [Rotate]: Rotates a picture. • [Play once]: Plays the collection of •... -
Page 24: Listen To Digital Radio Channels
Enable settings for hearing impaired [Play once]/[Repeat]: Enables or • disables repeat play, and plays a (Only available in some cities) Some digital TV video once only. channels broadcast special audio and subtitles [Shuffle on] /[Shuffle off]: Enables or • adapted for people who are hearing impaired. -
Page 25: Use Scenea To Display A Picture As Tv Wallpaper
You can use Scenea to display a picture as wallpaper on your TV. Make sure that the Philips continuously tries to improve its location of your TV is set to home (see ‘Change products and we recommend that you update TV preferences’... -
Page 26: Change Tv Preferences
Change TV preferences Update software (from website) Before performing this procedure be sure to: When watching TV, press (Home). • Set aside some time to complete the » The home menu appears. entire update. • Have available a USB storage device with Press the Navigation buttons to select at least 256MB of storage space. -
Page 27: Start A Tv Demo
Start a TV demo Re-install the TV Re-installing your TV restores default picture When watching TV, press (Home). and sound settings, including channel installation The home menu appears. » settings. Press the Navigation buttons to select When watching TV, press (Home). -
Page 28: Install Channels
6 Install channels • When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall The first time you setup your TV, you are stored channels. prompted to select a menu language and to install TV and digital radio channels (if available). - Page 29 Step 2 Search and store new TV Fine tune analog channels channels You can fine tune analog channels manually when reception is poor. In the [Analogue: Manual installation] menu, press the Navigation buttons to When watching TV, select the channel to select [Find channel].
-
Page 30: Use Automatic Channel Update
Use automatic channel Manually install digital update channels You can choose to enable automatic update of Press (Home). digital channels. If you enable this feature, the The home menu appears. » channels stored in your TV will be automatically Press the Navigation buttons to select updated upon network detection before the TV [Setup], then press OK. -
Page 31: Rename Channels
» To cancel and exit, press (Options) Press OK to confirm your choice. and follow the on-screen instructions. Press (Back) to exit the channel list. Hide and unhide channels Ned 2 Hide channels N et Nick kelo RTL 8 Hide channels from the channel list, to prevent KetN KetN KetN... -
Page 32: Set Up Your Favorite Channels
Set up your favorite channels Add or remove channels from a favorite list When watching TV, press (Browse) Select [Channel list], then press OK. The channel list appears. » Press the Navigation buttons to select the channel to add or remove. Press (Options). -
Page 33: Connect Devices
7 Connect devices DIGITAL AUDIO OUT Digital audio output to home theaters and other digital audio systems. HDMI This section describes how to connect devices Digital audio and video input from high- with different connectors. Examples are definition digital devices such as Blu-ray provided in the Quick Start. -
Page 34: Connectors For Pfl8605
Connectors for PFL8605 HDMI Digital audio and video input from high- Back connectors definition digital devices such as Blu-ray players. VGA and AUDIO IN Audio and video input from a computer. ANTENNA Signal input from an antenna, cable or satellite. Side connectors NETWORK Data input from a network. -
Page 35: Connect A Computer
Connect a computer HDMI cable and HDMI-DVI adaptor • (bottom HDMI and AUDIO IN) Before you connect a computer to the TV: AUDIO IN • Set the screen refresh rate on your DVI / VGA computer to 60Hz. • Select a supported screen resolution on your computer (see ‘Supported display resolutions’... -
Page 36: Connect To A Computer Network (For Pfl8605)
TV to a computer network. If necessary, read documentation accompanying network components. Philips is not responsible for lost, damaged or corrupt data. What you need • A network router (with DHCP enabled) •... - Page 37 In Microsoft Windows Media Player Note • The instructions are applicable to both Microsoft Windows XP and Vista. Enable media sharing In Microsoft Windows, start Windows Media Player 11. Windows Media Player appears. » Click the arrow next to Network discovery.
- Page 38 Add folders for media sharing In Windows Media Player, click Library -> Add to Library..Add To Libary window appears. » Click Add. Add Folder window appears. » Select a folder to share and click OK. Click My folders and those of others that I can access.
- Page 39 Click Add Folder. Add Media window appears. » In the Media Sharing Service box, click Start Sharing. A window appears, informing you that » Click Browse and select folders to share. Media Sharing Service started. When all folders are selected, click Click OK.
-
Page 40: Use A Conditional Access Module
Insert and activate a CAM Caution • Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the CAM and your TV. Switch off the TV. Following the directions printed on the CAM, gently insert the CAM into the CI (Common Interface) at the side of the Click Browse to add a folder location. -
Page 41: Use Philips Easylink
Use Philips EasyLink Pixel Plus Link Connected Philips EasyLink devices may apply their own picture quality processing to a Philips EasyLink provides several features video, before streaming it to the TV. This may that enable you to control devices that are interfere with the image processing of the TV. - Page 42 Note You usually connect the TV to a HDMI-CEC • Do not enable Philips EasyLink if you do not compliant device such as a HTS using both intend to use it. a HDMI cable (for video) and a digital audio cable (for audio).
- Page 43 Enable or disable Pixel Plus link Press the Navigation buttons to select [Setup], then press OK. Connected Philips EasyLink devices may apply Select [TV settings], then press OK. their own picture quality processing to a video, before streaming it to the TV. This may Select [EasyLink] >...
-
Page 44: Use Hdmi Arc
Use HDMI ARC The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital audio to a HDMI home theater. Enable or disable HDMI ARC Note • Do not enable HDMI ARC unless you intend to use it. -
Page 45: Product Information
Layer 2, .mpeg, Product information is subject to change LPCM, AC3 .vob without notice. For detailed product mpeg4 MPEG-4 AVC AAC-LC, .mp4 information, go to www.philips.com/support. (H.264, L2-CIF), AAC-HE MPEG-4 AVC (H.264, L4-HD) WMV9/VC1 .wma .wmv Supported display resolutions H.264 HE AAC, .mkv... -
Page 46: Tuner/Reception/Transmission
Supported TV mounts 40PFL66x5 • Dimension (WxHxD): 977 x 605 x 86 (mm) To mount the TV, purchase a Philips TV mount. • Weight: 13.7 kg To prevent damage to cables and connectors, 46PFL66x5 be sure to leave a clearance of at least 2.2 •... -
Page 47: Troubleshooting
There is sound but no picture: cable. If the blinking reoccurs, contact • Check that the picture settings are Philips Consumer Care. correctly set. You forgot the code to unlock the child lock There is poor TV reception from an antenna... -
Page 48: Sound Issues
• quality by changing the antenna direction Check that the volume is not set to 0. • or moving devices away from the TV. Check that the sound is not muted. • If reception on only one channel is poor, •... -
Page 49: Usb Connection Issues
TV and the TV does not display any mute or volume icon when the If you cannot resolve your problem, refer to volume is muted, increased or decreased. the FAQs for this TV at www.philips.com/ • This behavior is normal when a HDMI support. -
Page 50: Index
10 Index devices network connectors overview 31, 32 age ratings Ambilight brightness default settings change settings demo set active mode devices switch on or off add to home menu 10, 8 antenna connect Audio Return Channel, ARC remove watch digital channel subtitles batteries 44, 4, 45... - Page 51 HDMI 46, 31, 32 hearing impaired connect home mode resolution picture format change troubleshooting install channels picture settings automatic picture shift manual PIN code Pixel Plus link 41, 39 power 44, 45 preferences Kensington lock product specifications language radio menu 45, 10 reception 28, 45...
- Page 52 website automatic leveling sound settings 14, 14 mute specifications visually impaired 23, 23 subpages in teletext subtitles enable/disable wall mount language wallpaper switch channels on and off technical specifications teletext features menu search subpages Teletext 2.5 timer on timer sleep timer standby transmission 44, 45...
- Page 53 © 2010 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: Web_20100225...