Connect The Antenna Cable - Philips 42PFL8803D/30 User Manual

Philips lcd tv 42pfl8803d 107cm (42") dtv with ambilight and pixel plus 3 hd

Hide thumbs Also See for 42PFL8803D/30:

Quick start (1 page)

Table Of Contents

Table of Contents

Enlarged version

Firmly pull the stand from the bottom of

the TV. Place both the stand and screws in a

secure location for future reinstallation.

Step 3 Connect cables

Connect the antenna cable, mains cord and

all other devices to the back of the TV as

described in the following sections and in

Section 7.3 Connect devices.

Step 4 Secure the VESA-compatible wall

bracket to the TV

WARNING

Use bolts M8 and spacers to secure the

VESA-compatible wall bracket to your TV.

Note

Depending on your VESA-compatible wall

bracket, you may need to separate the

mounting plate from the wall bracket for

easier installation. Refer to your VESA-

compatible wall bracket documentation for

instructions.

Locate the four mounting nuts at the back

of the TV.

EN-8

Align the plate/bracket to the four

mounting nuts, placing the supplied

spacers between the plate/bracket and the

mounting nuts.

Using a spanner or cross-head screwdriver,

insert the supplied bolts through the plate/

bracket and spacers, tightly securing the

bolts to the mounting nuts.

Continue with the instructions provided

with your VESA-compatible wall bracket.

3.3