Use Timers And Child Lock - Philips 42PFL8803D/30 User Manual

6.5 Use timers and child
This section describes how to switch the TV on
or off at a specified time and to lock or unlock
the TV. Child lock is useful in preventing your
children from watching unauthorised content.
6.5.1 Automatically switch the TV to
standby (Sleep timer)
Sleep timer switches the TV to standby after a
defined period of time.
1. Press ANALOG MENU on the remote
control and select Features > Timer >
Sleep.
Features
Timer
Child Lock
Parental Lock
Demo
2. Press Æ to enter the Sleep menu.
3. Press Î or ï to select the sleep time. If set
to OFF, the sleep timer is switched off.
4. Press OK to activate the Sleep timer.
You can always switch off your TV earlier or
reset the time during the countdown.
6.5.2 Automatically switch the TV on
(Timer)
Timer switches the TV to a specified channel at
a specified time, from standby. Your TV must be
in standby for the timer to work.
1. Press ANALOG MENU on the remote
control and select Features > Timer.
2. Press Æ to enter the Timer menu.
Î or ï, Í or Æ to select and enter
3. Use
the menu items to set a time, start time,
stop time, and channel.
4. Press OK to confirm.
lock
Sleep
Time
Start Time
Stop Time
Channel
Activate
5. Press ANALOG MENU to exit.
E Tip
To switch off the timer, select Off in
Features > Timer > Activate.
6.5.3 Lock TV channels (Parental Lock)
You can lock TV channels with a four digit code
to prevent children from watching unauthorised
content.
To set or change a PIN code
1. Press ANALOG MENU on the remote
control and select Features > Parental
Lock > Change code.
Parental Lock
Lock Channel
Change Code
Clear All
Lock All
Æ to enter the code setup.
2. Press
3. Enter your code with the number buttons.
The Features menu reappears with a
message confirming that your code is
created or changed.
Tip
E
If you forget your code, enter '0711' twice
to override any existing codes.
To enter the Parental Lock menu
1. Press ANALOG MENU on the remote
control and select Features > Parental
Lock.
2. Press Æ to enter your code.
3. Enter your code with the number buttons.
EN-29