Connect The Mains Cord; Manage Cables; Insert The Remote Control Batteries; Switch On The Tv - Philips 42PFL8803D/30 User Manual

1. Locate the TV ANTENNA connector at
the back of the TV.
2. Connect one end of the antenna cable
(not supplied) to the TV ANTENNA
connector. Use an adaptor if the antenna
cable does not fit.
3. Connect the other end of the antenna
cable to your antenna outlet, ensuring that
the cable is tightly secured at both ends.
3.4 Connect the
WARNING
B
Verify that your mains voltage corresponds
with the voltage printed at the back of the
TV. Do not insert the mains cord if the
voltage is different.
3.4.1 To connect the mains cord
D Note
The location of the mains connector varies
according to TV model.
1. Locate the AC IN mains connector at the
back or on the bottom of the TV.
2. Connect the mains cord to the
mains connector.
3. Connect the mains cord to the mains,
ensuring that the cord is tightly secured at
both ends.
mains cord
AC IN
3.5

Manage cables

Route your mains cord, antenna cable and all
other device cables through the cable holder at
the back of the TV. This holder helps keep your
cables tidy and easily manageable.
3.6 Insert the remote control
batteries
1. Slide the battery cover off the back of the
remote control.
2. Insert the two supplied batteries. Be sure
the + and - ends of the batteries line up
with the markings inside the case.
3. Slide the cover back into position.
D Note
Remove the batteries if not using the
remote control for an extended period of
time.
3.7

Switch on the TV

The first time you switch on the TV, check that
the mains cord is properly connected. When
ready, turn on the mains.
EN-9