2. To encrypt the passwords, enter:
Adding a header to the configuration file
Add a header to add some descriptive information to the top of the configuration file. The
maximum length of the header is 80 characters.
Procedure steps
1. To enter the configuration mode, enter:
2. To add a header to the configuration file, enter:
3. To save the header information to the configuration file, enter:
Adding comments at the beginning of a configuration
Add comments at the beginning of a configuration. The comments appear after saving the
configuration using the save local command.
The maximum length of the comment string is 80 characters.
Procedure steps
1. To enter the configuration mode, enter:
2. To add comments at the beginning of a configuration, enter:
Adding comments to the end of a configuration
Add comments to the end of a configuration. The comments appear after saving the
configuration using the save local command.
Using the Command Line Interface
configure terminal
[no] secure_passwords
configure terminal
header "<header>"
save local <filename>
configure terminal
SYS_REM "<comments>"
Adding a header to the configuration file
August 2013
25