Irst Vision; 3: Ordering Information; Agency Approvals; Nfpa Standards - Honeywell NOTIFIER ONYX FirstVision Installation And Operation Manual

Introduction
1.2.3 Ordering Information
Please verify part numbers with your sales representative before and when you are ordering.

1.3 Agency Approvals

F V
IRST ISION
agencies. Before proceeding, the installer should be familiar with the following documents:

NFPA Standards

• National Fire Protection Association Standards 72.
• National Electric Code (NFPA 70).

Underwriters Laboratories U.S. Documents

• UL-864 Control Units and Accessories for Fire Alarm Systems.

Underwriters Laboratories Canada Documents

• CAN/ULC-S524-91 Standard for Installation of Fire Alarm Systems.
• CAN/ULC-S527-99 Standard for Control Units for Fire Alarm Systems.

Other

• Requirements of the Local Authority Having Jurisdiction (LAHJ).
WARNING:
!
Improper installation, maintenance, and lack of routine testing could result in system malfunction.
WARNING: Wiring
!
It is recommended that the installer conform to local code requirements when installing all wiring. All
power connections must be non-resettable.
1.3.1 Environmental Conditions
F V
IRST ISION
• Temperature range of 0ºC - 50ºC (32ºF - 120ºF).
• 10-95% humidity non-condensing at 30ºC (86ºF).
8
Part Number
FIRSTVISION-ENC
FIRSTVISION-LCD
has been designed to comply with standards set forth by the following regulatory
must be installed in the following environmental conditions:
F V ™ Installation and Operation Manual - P/N: 53034:Rev: A2 10/29/07
IRST ISION
Description
Enclosure
Liquid Crystal Display (LCD)
Agency Approvals