Table of Contents
Advertisement
Adjusting the picture
Using CableClear
reduction)
®
The CableClear
digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal (especially
a Cable channel) or playing a noisy video cassette or disc.
To select CableClear/DNR preferences:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
3. Press z to highlight the CableClear/DNR field, and then
press x • to make a selection.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Advanced Picture Settings
Dynamic Contrast
MPEG Noise Reduction
CableClear
Color Temperature
Back Lighting
100
Reset
Note:
• For the current inputs Antenna, Video 1,or Video 2, the menu
will display the text "CableClear. " If the signal is analog, the
available selections are Off, Low, Middle, High, and Auto. If
the signal is digital, the menu will display the text "CableClear"
and will be "grayed out" with "Off" selected.
• For the current inputs ColorStream HD or HDMI, the menu
will display the text "DNR. " If the video resolution is 480i, the
available selections are Off, Low, Middle, High, and Auto. If
the video resolution is 1080i, the available selections are Off,
Low, and High. If the video resolution is anything other than
480i or 1080i, the menu will display the text "DNR" and will
be "grayed out" with "Off" selected.
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
66
#01E_065-072_27HL95
66
Black
(E) 27HL95 *Web 213 : 276
Chapter 8: Using the TV's features
(continued)
®
/DNR (digital noise
ANT 1
On
Low
Auto
Cool
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Selecting the color temperature
You can change the quality of the picture by selecting from three
preset color temperatures (cool, medium, and warm), as
described below.
Mode
Picture Quality
Cool
blueish
Medium
neutral
Warm
reddish
To select the color temperature:
1. Press MENU and open the Video menu.
2. Highlight Advanced
Picture Settings and
press ENTER.
Video
Picture Settings
3. Press z to highlight
Advanced Picture Settings
Advanced Picture Settings
Theater Settings
the Color Temperature
field, and then press x • to select the mode you prefer
(Cool, Medium, or Warm).
Advanced Picture Settings
Dynamic Contrast
On
MPEG Noise Reduction
Low
CableClear
Auto
Color Temperature
Cool
Back Lighting
100
Reset
Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Note:
If you select one of the factory-set picture modes (Sports,
Standard, or Movie) and then change the color temperature
mode, the picture mode automatically changes to Preference in
the Picture Settings menu.
05.9.12, 15:44
ANT 1
Advertisement
Table of Contents
