Table of Contents
Advertisement
Learning about the remote control
The buttons used for operating the TV only are described here. For a complete list of the
remote control's functions, see the remote control functional key chart on pages 27.
For a list of the buttons that operate the TV Guide On Screen
turns the TV on and off. Press POWER to turn on the TV. The red indicator on the
POWER
TV will be illuminated. Press POWER again to turn off the TV.
displays TV setting information on-screen (page 75).
RECALL
selects the video input source (page 56).
INPUT
Channel Numbers (0–9, –/100)
channels (page 60) or to display the favorite channel list (page 38).
returns to the last viewed channel (page 60).
RTN
provides detailed information on highlighted items in the TV Guide On Screen
INFO
(Chapter 7).
accesses the main TV menu system (pages 29 and 30) or opens a menu in the
MENU
®
TV Guide On Screen
system (Chapter 7).
activates highlighted items in the main menu system and the TV Guide On Screen
ENTER
system.
When a menu is on-screen, these buttons select or adjust programming
Arrow buttons (yzx •)
x /
menus. (Also see
tunes to the next higher/lower favorite channel (page 38).
FAV yz
opens the TV Guide On Screen
TV GUIDE
cycles through programmed channels when no menu is on-screen (page 60); functions
CH yz
as page up/down when a menu is on-screen or when the TV Guide On Screen
(Chapter 7).
adjusts the volume level.
VOL yz
closes on-screen menus and the TV Guide On Screen
EXIT
switches between TV, CBL/SAT, VCR, and DVD modes (pages 24–26). Set to
Device Switch
"TV" to control the TV.
selects the picture mode (page 65).
PIC MODE
reduces or turns off the sound (page 70).
MUTE
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full
PIC SIZE
(page 61).
accesses the home function of the Channel Browser
HOME (
)
While watching TV, these buttons tune to the previous/next channel in the
x /
•
channel history (page 58). (Also see "Arrow buttons" above.)
freezes the picture (page 64).
FREEZE
accesses the sleep timer (page 73).
SLEEP
initiates the recording process when in the TV Guide On Screen
REC
illuminates the keypad for 5 seconds.
LIGHT
28
#01E_023-028_27HL95
28
Black
(E) 27HL95 *Web 213 : 276
Chapter 3: Using the remote control
®
directly tune channels. The "–" button is used to tune digital
• below.)
®
system (Chapter 7).
®
system.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
system, see page 43.
®
system
®
®
system is open
™
feature (page 59)
®
system.
05.9.12, 15:34
Note: The error message "Not
Available" will appear if you press a
key for a function that is not available.
Advertisement
Table of Contents
