Viewing the digital signal meter
You can view the digital signal meter in the ANT digital TV
input source only.
To view the digital signal meter:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T.
3
A new set of Installation menu icons will appear, as shown
below. Open the Terrestrial menu, highlight Signal
Meter, and press T.
Installation
Terrestrial
4
Press BbC c to select the antenna input and digital
channel whose signal you want to check.
Note: The physical digital channel number listed in the
Signal Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
Signal Meter
Signal Locked
Physical Digital Channel
Virtual Digital Channel
Advanced
To close the screen and return to the Terrestrial
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
36
Chapter 5: Setting up your TV
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter
0
Peak
0
4
4-1
Done
Viewing the system status
To view the system status:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T.
3
A new set of Installation menu icons will appear, as shown
below. Open the System Status menu, highlight
System Information, and press T.
Installation
System Status
4
Press C c to scroll through the menu bar to select the
Software Version and view the related information.
System Information
Software Version
Nov 17 2006 - 01:52:20
To close the screen and return to the Installation
menu:
Highlight Done and press T.
To return to normal viewing:
Press O.
System Information
LV07
3.2.21.0
FW: 0B
Done