Viewing The Cablecard™ Menu; Viewing The Digital Signal Meter - Toshiba 32HLX95 Owner's Manual

Viewing the CableCARD™ menu
™
A CableCARD enables you to view encrypted digital channels.
See page 15 for connection and subscription information.
™
After the CableCARD is inserted, a CableCARD
appears in the Applications menu, with informational screens
provided by your CableCARD
CableCard Connected -- Acquiring
channel information.
CableCard services will only operate with
cable signal connected to Antenna 1.
OK
To view the CableCARD ™ menu:
1. Press MENU and open the Applications menu.
™
2. Highlight CableCARD
3. Press yz to select one of the side menu items and press
ENTER to display the information.
Applications
TV Guide On Screen
Conditional Access
Digital CC/Audio Selector
CableCARD(tm) Pairing
CableCARD
CableCARD(tm) Status
Network Setup
Navigate Back
Select CH RTN EXIT
Note: The CableCARD™ menu is for informational purposes
only and has no user-adjustable options.
44
Chapter 6: Setting up your TV
™
option
™
service (see illustrations below).
and press •.
Exit
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Viewing the digital signal meter

You can view the digital signal meter for ANT 1 and ANT 2
digital TV input sources only.
To view the digital signal meter:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown in
step 3 below.)
Setup
Installation
Sleep Timer
On/Off Timer
PC Settings
HDMI Audio Auto
Gray Level 2
Navigate Select CH RTN Back EXIT
3. Open the Terrestrial menu, highlight Signal Meter, and
press ENTER.
Terrestrial
Input Configuration
Channel program
Channel Add/Delete
Signal Meter
Navigate Select CH RTN Back EXIT
4. Use yzx • to select the antenna input and digital channel
whose signal you want to check.
Note: The physical digital channel number listed in the Signal
Meter screen may not correspond to a virtual TV channel
number. Contact your local broadcasters to obtain the RF
channel numbers for your local digital stations.
Signal Meter
Signal Locked
0
Peak 0
Antenna 1
Physical Digital Channel 13
Virtual Digital Channel N/A
Done
To close the screen and return to the Terrestrial menu:
Highlight Done and press ENTER.
To return to normal viewing:
Press EXIT.
Exit
Exit