Toshiba Regza 26LV47 Owner's Manual page 37

Reset Factory Defaults
To reset all settings and channels to their factory
default values:
1
Press Y and open the Setup menu.
2
Highlight Installation and press T. A new set of
Installation menu icons will appear.
3
Open the System Status menu, highlight System
Information, and press T.
4
Press C c to scroll through the menu bar to select
Factory Defaults.
System Information
Factory Defaults
This window provides the ability to reset the TV
settings.Type in your PIN now (or "0000" if no
PIN has been set) to restore settings to their
factory default values.
5
Enter your PIN code (or 0000 if no PIN code has been set).
6
Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.
No
To cancel the reset:
Highlight No and press T.
Chapter 5: Setting up your TV
Done
Yes
37