Factory Preset Values; Factory Preset Values - Omega DP25B-E User Manual

SECTION 9. FACTORY PRESET VALUES
Table 9-1. Factory Preset Values
MENU ITEM
INPT
DEC.P
RD.S.O
RD.CF
COLR
S1.CF
S2.CF
S1.DB
S2.DB
OT.CF
OT.S.O
LK.CF
BRIT
SP1
SP2
Sensor Excitation Output: 12 Vdc
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

FACTORY PRESET VALUES

Input Type: 0-20 (0-20 mA dc input)
Decimal Point Position: FFFF
Reading Scale and Offset:
4-20 mA dc = 0-1000
Reading Configuration:
R.1=T (Tare enabled)
R.2=4 (10 µV resolution for unipolar &
25 µV resolution for bipolar)
R.3=F (Filtered value)
Normal Color Display:
RED or GRN (Note: depending how unit was ordered)
Setpoint 1 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched)
Setpoint 2 Configuration:
S.1=A (Setpoint is active above)
S.2=U (Setpoint is unlatched)
Setpoint 1 Deadband: 0003
Setpoint 2 Deadband: 0003
Output Configuration:
O.1=E (Analog output is enabled)
O.2=C (Analog output is current)
O.3=A (Analog output follows the display value)
Output Scale and Offset:
0-1000 = 4-20 mA dc
Lock Out Configuration
RS=E (Enable the RESET button in the Run Mode)
SP=E (Enable setpoint changes)
L3=0 (Display setpoint values)
H.BrT (Brightness Level)
Setpoint 1 Value: 0000
Setpoint 2 Value: 0000

Factory Preset Values

9
57