Automatically Printing Lists & Reports; Automatically Printing Lists & Reports - Toshiba GD-1200 Operator's Manual

2. Automatically Printing Lists & Reports
Automatically printing lists & reports
Reports are automatically output if the conditions in the setting of the lists & reports output (
ting the lists and reports output") are satisfied.
* Lists and reports are printed on LT/A4-size paper.
If LT/A4-size paper has run out, lists and reports are printed on the larger size paper.
• Transmission journal:
Printed after every 40 (or 120) transmissions.
• Reception journal:
Printed after every 40 (or 120) receptions.
• Memory transmission report
After memory transmission has ended, this report is output. The reduced transmission document can
be added by using "PRINT 1st PAGE IMAGE?".
• Direct transmission report:
After direct transmission has ended, this report is output.
• Multi transmission report:
After multi-address transmission has ended, this report is output. The reduced transmission document
can be added by using "PRINT 1st PAGE IMAGE?".
• Polling report:
After polling RX has ended, this report is output.
6
• Relay transmission originator terminal report:
When this equipment is setup as a relay originator, the report of the transmission to the relay stations is
output. The reduced transmission document can be added by using "PRINT 1st PAGE IMAGE?".
• Relay transmission relay station report:
When this equipment is setup as a relay station, the report of the transmission to the relay destinations
is output. The reduced transmission document can be added by using "PRINT 1st PAGE IMAGE?"
• Relay transmission end terminal report:
When this equipment is setup as a relay station, the report of the transmission to the relay destinations
is transmitted to the relay originator. The reduced transmission document can be added by using
"PRINT 1st PAGE IMAGE?"
• Mailbox reception report:
Printed when an original is received in a confidential, bulletin board or relay mailbox.
• Power failure list:
The list of the jobs which were erased will be output if there is something wrong with the contents of the
image memory when the main power switch is turned ON after a power failure during Fax communica-
tion.
122
6.PRINTING LISTS AND REPORTS
P.123 "Set-