Connections
Connections
Connecting to a TV
Connect the DVD/VCR to your TV.
Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you to
connect the S-video or ColorStream
Basic connection
Signal flow
Notes:
•
Refer to the owner's manual of the connected TV as well.
•
When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
•
If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not
supplied) and then connect to your TV.
•
Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
18
18
2K60121A.indb 18
2K60121A.indb 18
component video outputs to your TV/monitor also.
®
(yellow)
To VIDEO
To wall outlet
OUT
To video input
(red) (white)
To ANALOG AUDIO OUT
Audio/video cable (supplied)
To audio inputs
(red)
(white)
(yellow)
TV or monitor with
audio/video inputs
19
1/12/2007 3:50:08 PM
1/12/2007 3:50:08 PM