Connections; Antenna Connections - Toshiba SD-V395KC Owner's Manual

Dvd video player & video cassette recorder
Hide thumbs Also See for SD-V395KC:
Table of Contents

Advertisement

Connections

Connections

Antenna connections

If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page
the proper connections.
Antenna to DVD/VCR connection
The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and
connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an
antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram.
1
Combination VHF/UHF Antenna with 75 ohm Coaxial Cable
2
Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire
3
Separate VHF and UHF Antennas
VHF
Note: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and
one 75 ohm output.
Notes:
A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to
the DVD/VCR properly.
For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor
type antenna is required.
If you are not sure about the connection, please refer to qualified service personnel.
14
14
2K60121A.indb 14
2K60121A.indb 14
75 ohm Coaxial Cable
Matching Transformer 300 ohm Input 75
ohm output (not supplied)
300 ohm Twin Lead (Flat) Wire
(not supplied)
Combiner 75/300 ohm Inputs 75 ohm output
UHF
300 ohm Twin Lead (Flat) Wire
(not supplied)
75 ohm Coaxial Cable
DVD/VCR
DVD/VCR
DVD/VCR
(not supplied)
for
16
1/12/2007 3:50:05 PM
1/12/2007 3:50:05 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd-v395

Table of Contents