Second Audio Program (SAP)
Second Audio Program (SAP)
Your DVD/VCR is fitted with a SAP broadcast system which
enables you to switch to a second audio program when viewing
a selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1
Press VCR MENU. Then press SET + or – to select
"SAP".
2
Press ENTER to select "ON".
•
Then press VCR MENU until the menu screen is
cleared.
Listening to SAP
When the VCR is turned on or a channel selection is made,
make certain the letters "SAP" appears on the screen
for about 4 seconds. This means that the "Second Audio
Program" broadcasting is available.
Notes:
•
When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically be monaural.
•
When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cable not
connected), the sound will be monaural.
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you
can duplicate a previously recorded tape. Make all connections
before turning on the power.
Duplicating a video tape
Preparation:
•
Turn ON the TV and select the corresponding video input.
•
Press VCR DVD selector to select the VCR mode. (The
VCR mode indicator will light.)
•
Load a cassette tape with the erase prevention tab intact.
•
Load a previously recorded tape into the playback VCR or
Camcorder.
1
Press SP/SLP to select the desired tape speed SP
or SLP.
•
It is recommended to set the tape speed to the
SP mode on the recording VCR for best results.
2
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
•
"L1" or "L2" will appear
on the display.
L1: on the rear panel L2: on the front panel
3
Press PLAY on the playback VCR or Camcorder.
4
Press REC/OTR on the recording VCR.
•
The duplicating process begins.
5
Press STOP when you finish duplicating.
2K60121A.indb 31
2K60121A.indb 31
Connection with second VCR
Playback VCR
To VIDEO OUT
To AUDIO (L) OUT
To AUDIO (R) OUT
AUDIO/VIDEO cable (not supplied)
Connection with Camcorder
Playback Camcorder
To AV Jack
AUDIO/VIDEO cable (not supplied)
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer's instructions. A typical
camcorder dubbing hookup is shown above.
Recording a DVD/CD disc
You can record disc material in DVD, Audio CD, etc. onto a
Video tape with this DVD/VCR.
Duplicating a DVD or CD disc
Preparation:
•
Turn ON the TV and select the corresponding video input.
•
Press VCR DVD selector to select the VCR mode. (The
VCR mode indicator will light.)
•
Load a cassette tape with the erase prevention tab intact.
•
Load a DVD/CD disc.
1
Press SP/SLP to select the desired tape speed SP
or SLP.
2
Press VCR DVD selector to select the DVD mode.
•
The DVD mode indicator will light.
3
Press PLAY to start playback.
4
Press REC/OTR to start recording.
•
The DVD/VCR will change to the VCR mode
automatically and the playback picture or sound
will be duplicated on the video cassette tape.
5
Press STOP when you finish recording.
•
If you wish to stop a DVD/CD disc, press VCR DVD
selector to change the DVD mode, then press STOP.
Notes:
•
You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commences
on the DVD.
•
When the scanning mode is set to the progressive mode,
you cannot duplicate a disc material onto a video tape.
When REC/OTR is pressed, the PROGRESSIVE indicator
"
" on the display window will flash.
•
You cannot record discs encoded with copy guard
function. The following icon and text will show up on the
TV screen.
DISC IS COPY PROTECTED
LINE IN 2
To VIDEO
IN
To AUDIO (L) IN
To AUDIO
(R) IN
LINE IN 2
To VIDEO
IN
To AUDIO (L) IN
To AUDIO
(R) IN
31
1/12/2007 3:50:13 PM
1/12/2007 3:50:13 PM