Catv (Cable Tv) Connections; Connecting To A Tv - Toshiba SD-V392SU Service Manual

Connections

CATV (CABLE TV) connections

Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This
DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company
supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a
premium channel which is scrambled, you must have a descrambler box for proper reception.
1
DVD/VCR
Incoming Cable
Allows: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.
2 DVD/VCR
Converter/
Descrambler
Incoming
Cable
Allows: * Recording of channels through the converter box
(scrambled and unscrambled).
* Using the programmable timer to record only the
channel selected at the converter box.
Prevents: * Recording one channel while watching another.
* Using the DVD/VCR tuner to select channels.
3 DVD/VCR
Incoming Cable
Allows: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording an unscrambled channel while watching
any channel selected at the converter box.
Prevents: Recording scrambled channels.
Note: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output of
the Converter/Descrambler box, usually channel 3 or 4.
16
Connections

Connecting to a TV

Connect the DVD/VCR to your TV.
Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you
also connect the S-video or ColorStream ® component video outputs to your TV/monitor. (See page 19.)
Connecting to a TV
Signal flow
To wall outlet
Notes:
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not
supplied) and then connect to your TV.
• Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
18
TV
IN
(ANT) VHF/UHF
IN (ANT)
OUT
(TV)
TV
IN
(ANT)
VHF/UHF
IN (ANT)
OUT
(TV)
Note:
To record from converter/descrambler,
DVD/VCR tuner must be tuned to the con-
verter output channel, usually channel 3
or 4.
TV
IN
(ANT) Converter/Descrambler VHF/UHF
IN (ANT)
OUT
(TV)
Note:
If you are playing a tape or using the tuner
built into the DVD/VCR, the converter must
be set to the video channel output of the
DVD/VCR (either 3 or 4).
(yellow) (red) (white)
To ANALOG AUDIO OUT
To VIDEO
Audio/video cable (supplied)
OUT
To audio inputs
To video input
(red)
(yellow)
TV or monitor with
audio/video inputs
IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode.
This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scram-
bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Con-
sult your local cable company for more information concerning connection to their descrambler equipment. There are
many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
4
Splitter
Incoming Cable
Converter/Descrambler
Allows: * Recording of one channel while watching another.
* Using the programmable timer to record only the channel selected at the converter box.
* Recording of all channels through the converter box.
Prevents: * Watching scrambled channels while recording another channel.
* Using the DVD/VCR tuner to select channels.
5
Splitter
Incoming Cable
Allows: * Recording of nonscrambled channels.
* Recording of one channel while watching another.
* Watching premium channels through the converter while recording nonscrambled channels.
* Using the programmable timer.
Prevents: Recording scrambled channels.
6
Converter/Descrambler
Splitter
Incoming Cable
Allows: * Recording of all channels through the converter box.
* Recording a scrambled or unscrambled channel while watching another (scrambled or
unscrambled) channel.
* Using the programmable timer to record only the channel selected at the converter box.
Prevents: Using the DVD/VCR tuner to select channels.
S-video output/input
An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has S-
Video input, and does not have component video inputs.
Component video outputs/inputs
PROGRESSIVE outputs/inputs
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video
signal. Connenting to these inputs allows you to view the highest quality pictures with less flicker.
INTERLACED outputs/inputs
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality
DVD picture playback.
Notes:
• Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
• In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
Connecting to an audio system and TV equipped with S-video input/component video inputs
Note: The S-video output and component video output transports the DVD-video signal exclusively and will deliver
enhanced DVD video picture performance.
Signal flow
To S- To P /C To P
R R
VIDEO VIDEO VIDEO
OUT OUT OUT
(white)
To P
To P
S-video cable (not supplied)
If you connect the DVD/VCR to your TV
with the DVD OUT jacks, select the
corresponding video input on your
television to watch DVD video discs.
Notes:
• Refer to the owner's manual of the connected equipment as well.
• When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/
VCR away from the tuner and radio.
• The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD/VCR's power cord. If you leave the amplifier power on, the
speakers may be damaged.
• When connecting to a TV using the Video or S-video jack, make sure that the Progressive indicator "
display window is not lit. If it is lit, the Video and S-video outputs do not feed the correct signals and you cannot see
any picture. To turn off the Progressive indicator, select PROGRESSIVE scan Off (see page 66).
DVD/VCR
A/B Switch
IN
(ANT)
OUT
(TV)
DVD/VCR
IN
(ANT)
A/B Switch
OUT
Converter/Descrambler
(TV)
DVD/VCR
IN
(ANT)
OUT
A/B Switch
(TV)
Converter/Descrambler
To ANALOG
(white)
AUDIO OUT
(red)
When you make this connection, set the S-VIDEO/
To wall outlet
COMPONENT Video selector switch to the desired
/C To Y
B B
position.
VIDEO
And also you must select the corresponding video
OUT
input on your TV.
Audio cable (not supplied)
Component video
cable (not supplied)
To audio inputs of
To Y video input
C video input
B/ B
C video input
R/ R
To S-video input
TV or monitor with
ColorStream ®
component video inputs
TV
VHF/UHF
IN (ANT)
A
B
TV
VHF/UHF
IN (ANT)
A
B
TV
VHF/UHF
IN (ANT)
A
B
17
the amplifier
(red) (white)
Audio system
" on the
19