Loading And Unloading A Cassette Tape - Toshiba SD-V395KC Owner's Manual

Basic setup (VCR)/ Playback (VCR)
To ADD/DELETE channels
1
Press VCR MENU. Press SET + or – to select "CH
SETUP", then press ENTER.
2
Press SET + or – to select the "ADD/DELETE" and
press ENTER.
3
To Add or Delete channels
1) Press Direct channel selection buttons (0–9) or
SET +/– to select a channel number you want to add
or delete.
2) To add channels
Press ENTER until "ADD" appears on the screen.
To delete channels
Press ENTER until "DELETE" appears on the screen.
The channel number will blink.
3) Repeat step 1 and 2 to add or delete other channel.
4
Press VCR MENU until the menu screen is cleared.
Noise elimination
When you don't want to receive a weak signal broadcast, a
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND to "ON". When the unit is shipped from the
factory, the NO NOISE BACKGROUND is set to "ON".
1
Press VCR MENU. Press SET + or – to select
"SYSTEM SETUP", then press ENTER.
2
Press SET + or – to select "NO NOISE BACKGROUND".
3
Press ENTER to select "ON" or "OFF" position.
4
Press VCR MENU repeatedly until the menu screen
is cleared.
2K60121A.indb 25 2K60121A.indb 25
Loading and unloading a
cassette tape
Use only video cassette tapes marked
Loading
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab
Automatic power ON
When you insert a cassette tape, the unit power will turn ON
automatically.
Automatic playback
When loading a cassette tape without an erase prevention
tab, playback will start automatically.
Unloading
1
Press EJECT on the front panel or on the remote
control.
2
Remove the cassette tape.
Automatic tape eject
This DVD/VCR will automatically rewind the tape when
the tape has ended. Once the tape is rewound to its
beginning, the cassette tape will be ejected automatically.
To prevent accidental erasure
To prevent accidental
erasure
Remove the erase prevention
tab with a screwdriver.
To record again
Cover the hole with a piece of
adhesive tape.
Tape speed and maximum recording time
Tape speed
Video cassette tape
SP (Standard Play) SLP (Super Long Play)
T-160 2-2/3 hours
T-120 2 hours
T-90 1-1/2 hours
T-60 1 hour
T-30 30 minutes
.
Screwdriver
Erase
prevention
tab
Adhesive tape
8 hours
6 hours
4-1/2 hours
3 hours
1-1/2 hours
25
1/12/2007 3:50:10 PM 1/12/2007 3:50:10 PM