Toshiba IK-DP30A Instruction Manual page 27

Toshiba dome camera instruction manual ik-dp30a

Hide thumbs Also See for IK-DP30A:

Table of Contents

6.10.2 FREEZE ACTIVITY

During frame scan, random scan or auto patrol, camera images will not be shown while the dome

camera moves from the current position to the next position.

MAIN MENU

EXIT

To set STOP TIME:

1. Enter the preset command to access the main menu.

Refer to section 6.1 for the controller model and preset command.

2. Position the cursor ( ) next to OTHERS and press the OPEN button to access the menu.

3. Position the cursor next to FREEZE ACTIVITY and press the OPEN button to move the cursor

to the right.

4. Move the joystick up or down to set freeze activity to ON or OFF.

5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE

button.

6.10.3 LOAD FACTORY DEFAULTS

The factory default settings can be loaded.

MAIN MENU

EXIT

To set LOAD FACTORY DEFAULT:

1. Enter the preset command to access the main menu.

Refer to section 6.1 for the controller model and preset command.

2. Position the cursor ( ) next to OTHERS and press the OPEN button to access the menu.

3. Position the cursor next to LOAD FACTORY DEFAULT and press the OPEN button twice to load

factory default settings.

OTHERS MENU

POWER UP

FREEZE ACTIVITY ON

LOAD FACTORY DEFAULT

TILT ANGLE OUTDOOR