Table of Contents
Advertisement
Notes:
1) Masking areas are only rectangles.
2) When using the PTZ function the privacy zone expands 2x vertically and 4x horizontally.
3) Although the privacy zone works in digital zoom, the zone setting is only available in a non-
digital zoom area.
4) It is recommended to set privacy zone bigger than actual masking area.
5) During turbo panning or tilting, the privacy zone may shift depending on the location of the zone.
6.8 PAN/TILT SETUP
6.8.1 AUTO FLIP
The Auto Flip feature allows the tilt to rotate 180 degrees and reposition itself for continuous
viewing of a moving object directly beneath the dome.
Menu
MAIN MENU
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
To enable AUTO FLIP:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to AUTO FLIP and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to select ON or OFF.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
PAN/TILT MENU
AUTO FLIP
PROPORTIONALP/T
SCAN LIMIT STOPS
MANUAL LIMIT STOPS OFF
PARK TIME MIN
AUTO PATROL P1→OFF
SCAN SPEED
SCAN TILT ANGLE 30DEG.
STOP TIME
MAX SPEED
- 18 -
ON
ON
OFF
0MIN
5DEG./S
10SEC
400DEG/S
Advertisement
Table of Contents
