Nuisance Call Block; Storing Unwanted Callers - Panasonic KX-TGH720E Operating Instructions Manual

Nuisance call block

You can press the M
situations to disconnect the current call and
add a phone number to the call block list:
– when an incoming call is being received
– when an incoming call is being recorded by
the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1
Press M N under the situations shown
above.
2
Confirm the call block number and press
MYESN.
R The call block number is stored in the
call block list, "Call Blocked" is
displayed, and then the call is
disconnected.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available for
intercom calls or calls received by call
waiting.
R Blocked calls are logged in the caller list.

Storing unwanted callers

The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
– "Single Number": The unit blocks calls
from specific phone numbers stored in the
call block list.
– "Range of Numbers": The unit blocks
calls that begin with a number stored in the
call block list, such as a toll-free phone
number prefix or certain area codes.
– "Withheld": The unit blocks calls that
have no phone number.
However, this option may not be available in
the following situations:
– If the caller dials from an area which does
not provide a Caller ID service.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
N key in the following
Nuisance Call Block
– International calls.
Single phone numbers and ranges of numbers
can be stored in the call block list up to 1,000
items in total.
Blocking unwanted callers:
When a call is received, the unit does not ring
while the caller is being identified.
If the caller's phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
Adding call blocked numbers from
the caller list
1
M N
2
MbN: Select the desired entry to be
blocked.
3
M N a MbN: "Yes" a MOKN a M
Adding call blocked numbers
manually
1
M N
2
MbN: "Nuisance Call Block" a MOKN
3
MbN: "Single Number" a MOKN
4
MMENUN a MbN: "Add" a MOKN
5
Enter the phone number (24 digits max.).
a MOKN a M
Storing a range of numbers
1
M N
2
MbN: "Nuisance Call Block" a MOKN
3
MbN: "Range of Numbers" a MOKN
4
MMENUN a MbN: "Add" a MOKN
5
Enter the desired number (2-8 digits). a
MOKN a M N
N
N
19