Nuisance Call Block - Panasonic KX-TGK210BX Operating Instructions Manual

Table of Contents

Advertisement

Changing the start and end time
1
M
N#237
2
Continue from step 3, "Turning do not
disturb mode on/off", page 26.
Setting the ring delay
This setting allows the handset to ring during
do not disturb mode if the caller waits long
enough. After the selected amount of time
passes, the handset rings. If you select "No
Ringing", the handset never rings during do
not disturb mode.
1
M
N#239
2
MbN: Select the desired setting. a MOKN
a M
N
Note:
R When the answering system answers the
call, this feature does not work.
(KX-TGK220 series: page 3)
Selecting categories to bypass do
not disturb mode
Available for:
KX-TGK220 series (page 3)
1
M
N#241
2
MbN: Select the desired categories. a
M N
R " " is displayed next to the selected
category numbers.
R To cancel the selected category:
MbN: Select the category. a Press
M N again. " " disappears.
3
MOKN a M
N

Nuisance call block

This feature blocks calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list.
– "Single Number": The unit blocks calls
from specific phone numbers.
TGK2xxBXUE_OI(en)_0807_ver102.pdf 27
– "Range of Numbers": The unit blocks
calls that begin with a number stored in the
call block list, such as a toll-free phone
number prefix or certain area codes.
Single phone numbers and ranges of numbers
can be stored in the call block list:
– up to 30 items in total. (KX-TGK210 series:
page 3)
– up to 50 items in total. (KX-TGK220 series:
page 3)
You can also set the unit to block calls that
have no phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller's phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R Blocked calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
n From the caller list:
1
M N
2
MbN: Select the entry to be blocked. a
M
N
3
MbN: "Save Call Block" a MOKN
4
MbN: "Yes" a MOKN a M
n By entering phone numbers:
1
M
N#217
2
MbN: "Single Number" a MOKN
3
M
N a MbN: "Add" a MOKN
4
Enter the phone number (24 digits max.).
R To erase a digit, press MCN.
5
MOKN a M
N
Storing a range of numbers
1
M
N#217
2
MbN: "Range of Numbers" a MOKN
3
M
N a MbN: "Add" a MOKN
Programming
N
27
30/8/2017 11:22:06 AM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tgk210ueKx-tgk220bx

Table of Contents