Lan/Modem Jack; Figure 4-26 Removing The Lan/Modem Jack - Toshiba PORTEGE R200 Replacement Procedures

Hide thumbs Also See for PORTEGE R200:

Table of Contents

4 Replacement Procedures

4.19 LAN/Modem jack

Removing the LAN/Modem jack

To remove the LAN/Modem jack, follow the steps below and refer to Figure 4-26.

1. Disconnect the LAN cable from the connector CN4100 on the system board.

2. Remove the LAN/Modem jack from the slot.

LAN cable

Installing the LAN/Modem jack

To install the LAN/Modem jack, follow the steps below and refer to Figure 4-26.

1. Install the LAN/Modem jack to the slot.

2. Connect the LAN cable to the connector CN4100 on the system board.

4-38

[CONFIDENTIAL]

LAN/Modem jack

CN4100

4.19 LAN/Modem jack

PORTEGE R200 Maintenance Manual (960-519)

Table of Contents