4 Replacement Procedures
Installing the Switch board
To install the switch board, follow the steps below and refer to Figure 4-10.
1. Connect the switch cable to the connector CN3270 on the system board.
2. Install the switch board according to the guide and secure it with the following
screw.
• M2×2.5C S-FLAT HEAD screw
3. Install the switch cover.
4. Turn over the computer and secure the switch cover with the following screw.
•
4-20
[CONFIDENTIAL]
M2×8S
BIND screw
x1
x1
PORTEGE R200 Maintenance Manual (960-519)
4.7 Switch board