Figure 4-15 Removing The Battery Latch Assembly - Toshiba PORTEGE R200 Replacement Procedures

4 Replacement Procedures
5. Remove the following screws and battery latch assembly.
• M2×2.5B S-FLAT HEAD screw
M2×2.5B S-FLAT HEAD
Battery latch assembly
Installing the Cover assembly/Battery latch assembly
To install the cover assembly/battery latch assembly, follow the steps below and refer to
Figure 4-13 to 4-15.
1. Install the battery latch assembly and fix it with the following screws.
• M2×2.5B S-FLAT HEAD screw
2. Install the cover assembly to the base assembly and secure it with the following
screws.
•
3. Turn over the computer and secure the following screws.
•
•
4-26 [CONFIDENTIAL]

Figure 4-15 Removing the battery latch assembly

M2×4B S-FLAT HEAD screw
M2×4S BIND screw
M2×3S S-FLAT HEAD screw
4.9 Cover assembly/Battery latch assembly
x3
M2×2.5B S-FLAT HEAD
x3
x2
x13 ("4" in the figure 4-13)
x1 ("3" in the figure 4-13)
PORTEGE R200 Maintenance Manual (960-519)