Installing and connecting the device
3.4 Connecting the device
Procedure
1. Ensure that the cable ends of the power
supply lines are fitted with end sleeves.
2. Switch off the 24 V DC power supply.
3. Fasten the end of a connecting cable L+
and a connecting cable M with the supplied
power supply terminal.
4. Connect the power supply terminal to the
relevant terminal on the device.
5. Connect the remaining L+ and M ends with
the respective terminals on the 24 V DC
power supply.
54
Industrial Flat Panel IFP1500, IFP1900, IFP2200, IFP1900 PRO, IFP2200 PRO, IFP1900 ETH, IFP2200 ETH
Operating Instructions, 07/2016, A5E31298376-AF