Installation Procedure - Toshiba RAV-SM560XT-E Service Manual

Remark per EMC Directive 89/336/EEC
To prevent flicker impressions during the start of the compressor (technical process) following installation
conditions do apply.
1. The power connection for the air conditioner has to be done at the main power distribution. This distribution
has to be of an impedance.
Normally the required impedance is reached at a 32A fusing point. Air conditioner fuse has to be 16A max.!
2. No other equipment should be connected to this power line.
3. For detailed installation acceptance, please contact your power supplier whether its restriction does apply
for products like washing machines, air conditioners or electrical ovens.
4. For power details of the air conditioner, refer to the rating plate of the product.
9-1. Installation Diagram of Indoor and Outdoor Units
(Under Ceiling Installation)
7
Zeolite filter
Air filter
Before install the wireless
remote controller
• With the remote controller cover
open, load the batteries supplied
correctly, observing their polarity.
% %
% % % Wireless remote controller
Cover
! !
! Batteries ! !

9. INSTALLATION PROCEDURE

9
Filter frame
8
Purifying filter
%
Wireless remote controller
– 27 –
Pipe shield
(Console Installation)
1
Installation plate
#
Pan head wood screw
"
Remote controller holder
Hook
4
Insulate the refrigerant pipes
separately with insulation, not
together.
Min 6 mm thick heat resisting
polyethylene foam
Mounting
screw