Toshiba RAS-10GAVP-E Service Manual page 110

No. Photo / Explanatory diagram
1-5
Valve fixing plate
1-6
1-7
Remove the motor base assembly, partition plate assembly
Motor base and the sound insulation board.
assembly
Related parts / Screws list
Partition plate
assembly
Part name
Motor base assembly
(Including motor and fan)
Partition plate assembly
Sound
(Including reactor)
insulation board
Remove the fixing screws of the heat exchanger and the
valve fixing plate. Remove the compressor fixing bolt.
Heat exchanger
Related parts / Screws list
Part name
Heat exchanger
Valve fixing plate
Compressor
Compressor
As shown in the left figure, remove the set of refrigeration cycle
assembly from the outdoor unit base plate.
* In this time, work attentively so that the cycle pipes are not
damaged by dent or deformation. Apply protective
measures to pipes if necessary.
Appendix-5
Procedure
Used screw
Screw type Quantity
Ø4 × 8 2
Ø4 × 8 3
Used screw
Screw type Quantity
Ø4 × 8 1
Ø4 × 8 1
bolt 3
Appendix