Remote Control And Its Functions - Toshiba RAS-10JAVP-E Owner's Manual

REMOTE CONTROL AND ITS FUNCTIONS

a Infrared signal transmitter
Transmits signals to the indoor unit.
b
button
Press the button to start operation. (A receiving beep is
heard.) Press the button again to stop operation. (A
receiving beep is heard.)
If no receiving sound is heard from the indoor unit, press
the button twice.
c Mode select button (MODE)
Press this button to select a mode. Each time you press
the button, the modes cycle in order from A: Auto
changeover control,
to A.
(A receiving beep is heard.)
d Temperature button (
.. The temperature setting is increased to 30°C.
... The temperature setting is reduced to 17°C.
(A receiving beep is heard.)
e Fan speed button (FAN)
Press this button to select the fan speed. When you select
AUTO, the fan speed is automatically adjusted according to
the room temperature. You can also manually select the
desired fan speed from five available settings.
(LOW , LOW+
HIGH ) (A receiving beep is heard.)
f Auto louver button (SWING)
Press this button to swing the louver. (A receiving beep is
heard.)
Press the button again to stop the louver from swinging. (A
receiving beep is heard.) (
g Set louver button (FIX)
Press this button to adjust the air flow direction. (A
receiving beep is heard.) (
h ON timer button (ON)
Use this button to change the clock and ON timer times.
To move up the time, press
To move down the time, press
i OFF timer button (OFF)
Use this button to change the OFF timer times.
To move up the time, press
To move down the time, press
j Reserve button (SET)
Press this button to store the time settings. (A receiving
beep is heard.)
k Cancel button (CLR)
Press this button to cancel the ON timer and OFF timer. (A
receiving beep is heard.)
l High power button (Hi POWER)
Press this button to start high power operation. (
page 16.)
m Memory button (MEMO)
Press this button to ready for storing the settings.
Hold down the button for more than 3 seconds to store the
setting indicated on the remote control and until the
mark is displayed. (
EN
: Cool, : Dry, : Heat and back
)
TEMP
, MED , MED+
see page 14.)
see page 14.)
of the "ON " button.
ON
of the "ON " button.
ON
of the "OFF " button.
OFF
of the "OFF
OFF
see page 13.)
n Automatic operation button (AUTO)
Press this button to operate the air conditioner
automatically.
(A receiving beep is heard.) (
o Economy button (ECO)
Press this button to operate the air conditioner
economically. (
p FILTER button
Press this button to turn off the filter cleaning indicator on
the indoor unit.
Press this button after cleaning the air filter. (
page 19.)
q PRESET button
Press this button to operate the air conditioner according to
the settings stored using the MEMO button. (
page 13.)
r Air purifying button (PAP)
Press this button to start the electrical air purifying
operation.
Press the button again to stop operation.
s Sleep timer button (SLEEP)
Press this button to start the sleep timer (OFF timer)
operation.
You can select the OFF timer time from among four
settings (1, 3, 5 or 9 hours).
,
" button.
see
4
see page 16.)
see page 16.)
a
r
AUTO
PAP
TEMP
d
MODE PRESET
c
b
l
HiPOWER ECO MEMO
g
1 . 3 . 5 . 9H
f
SWING FIX FAN SLEEP
k
CLR SET
ON OFF
FILTER
CLOCK
RESET
CHECK
h
see
see
n
q
o
m
e
s
j
p
i