Troubleshooting (Remote Control) - Toshiba RAS-10JAVP-E Owner's Manual

TROUBLESHOOTING (Remote Control)

Before asking for servicing or repairs, check the following points.
Symptoms
The fan speed cannot be
changed.
Symptoms
The indicators on the display
are not shown after a short
time.
The TIMER display turns off
after a certain period of time.
Symptoms
No receiving tone is made from
the indoor unit even when the
button is pushed.
EN
Settings Cannot be Changed
Causes
• Check whether the MODE indicated
on the display is "AUTO".
AUTO
• Check whether the MODE indicated
on the display is " : DRY".
: DRY
The Display Goes Off
Causes
• Check whether the timer operation is
over when the OFF TIMER is shown
on the display.
• Check whether the timer operation
has started when the ON TIMER is
shown on the display.
: ON
The Signal Receiving Tone Does Not Sound
Causes
• Check whether the signal transmitter
of the remote control is properly
pointed towards the receiver of the
indoor unit when the
pushed.
28
Description and Remedy
When automatic mode is selected, the
air conditioner automatically selects
the fan speed.
When dry operation is selected, the air
conditioner automatically selects the
fan speed. The fan speed can be
selected during "
" HEAT" and "A".
The air conditioner stops since the
setting time has elapsed.
When the time reaches the time
setting for the ON timer operation, the
air conditioner starts to operate
automatically and the ON timer display
turns off.
Point the signal transmitter of the
remote control towards the receiver of
the indoor unit, and then press the
button is button repeatedly.
COOL",
Description
Description